Prepare Panoramic Roof Frame For Installation - AR77.21-P-0800-02LF
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205
with code 413 (Automatic panoramic sliding sunroof)
Model 222
with code 398 (Panoramic roof with MAGIC SKY CONTROL)
Model 222
with code 413 (Automatic panoramic sliding sunroof)
Model 253
with code 413 (Automatic panoramic sliding sunroof)
| Topical note | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
MODIFICATION NOTES
| 23.04.2018 | Notes on removal/installation of bonded elements of the panoramic roof added. |
- Check panorama roof frame (1) and all detachable parts for damage.
If there is a problem, ↓
Replace corresponding component.
- Attach suction lifters to the outside of the panorama roof frame (1) and lay panorama roof frame (1) down on a suitable base with the inside pointing upward.
- Apply cleaner with one part of the paper towel on the bonding surfaces (2) of the panorama roof frame (1) and wipe off with the other part of the paper towel.
Shown on model 222 on the front panorama roof frames (1)