Remove/Install Roller Sun Blind Guide Rail - AR77.21-P-0231NKA
WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 156, 176
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 205.0/1/2/3
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 238
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 253
with code 413 (Automatic Panoramic Sliding Sunroof)
| Risk Of Injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Remove/Install | |||
| 1 | Detach left and right panoramic sliding roof guide rail (2) | Do not remove panoramic sliding roof roller sun blind motor and roller sun blind drive cable. |
AR77.21-P-0430NKA |
| 2 | Carefully raise panoramic roof guide rail (2) at rear and pull roller sun blind guide rail (1) toward rear out of panoramic sliding roof guide rail (2) | Replace seal (3). |
|
| 3 | Install in the reverse order |