LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2020 >> GLE450 >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Interior Equipment - 213 Chassis) >> Testing & Repair >> Remove/Install Bottom Paneling For Dashboard On Passenger Side >> Remove/Install Bottom Paneling For Dashboard On Passenger Side - AR68.10-P-1502LWE

Remove/Install Bottom Paneling For Dashboard On Passenger Side - AR68.10-P-1502LWE

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 213 

Model 238 

MODIFICATION NOTES

20.03.2017 Removal of door sill added. Operation step 2  

Shown on model 213.0 

G13747122Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Move passenger seat to end position toward rear    
2 Remove door sill molding Model 213 AR68.30-P-4100LW 
    Model 238 AR68.30-P-4100CLW
3 Unscrew bolts (2)    
4 Unclip cover (1) from retaining clips (3), push outward using hook (5), unhook, and lower (arrow) until electrical connectors (4, 6) are accessible SPECIAL TOOL Mounting wedge Fig 1
5 Disconnect electrical connections (4, 6)    
6 Take off cover (1)    
7 Transfer temperature sensor (8) When replacing cover (1).  
8 Transfer footwell lamp (7) When replacing cover (1).  
9 Install in the reverse order    
Fig 1: Identifying Mounting Wedge (110 589 03 59 00)
G07079389Courtesy of MERCEDES-BENZ USA