Remove/Install Door Sill Molding - AR68.30-P-4100LW
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
Model 205.0/1/2
Model 213
Model 253
Model 293
Shown on model 205.0
| Remove/install | |||
| 1 | Unhook bracket (1.1) from front door sill (1) at bottom of B-pillar paneling | Only when removing front door sill (1). | |
| 2 | Detach front door sill (1) starting at B-pillar paneling from retaining clips (2) and remove | Only when removing front door sill (1). | |
| 3 | Unhook bracket (3.1) from rear door sill (3) at bottom of B-pillar paneling | Only when removing rear door sill (3). | |
| 4 | Detach rear door sill (3) from retaining clips (4) | Only when removing rear door sill (3). | |
| Fig 1 | |||
| 5 | Unclip rear door sill (3) from retaining clip (5) | Only when removing rear door sill (3). |
|
| Fig 2 | |||
| 6 | Lift rear bench seat cushion (6) at side | Only when removing rear door sill (3). | |
| 7 | Detach rear door sill (3) below rear bench seat cushion (6) from retaining clips (7) | Only when removing rear door sill (3). | |
| Fig 1 | |||
| 8 | Move rear door sill (3) upward out of guides (8) and remove | Only when removing rear door sill (3). | |
| 9 | Install in the reverse order |