Remove/Install Steering Column Module - AR54.25-P-2802LW
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 213, 238, 253, 293
Shown on model 205
Shown on model 205
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Perform commissioning of steering column tube module (1). | When replacing the steering column tube module (1). | |
| Model 293 | AD00.00-P-2000-06FR | ||
| Model 238 | AD00.00-P-2000-06LWO | ||
| Model 205, 213, 253 | AD00.00-P-2000-04B | ||
| 2 | Move steering wheel all the way to the rear. | ||
| 3 | Turn steering wheel to center position (front wheels in straight-ahead position). | ||
| 4 | Remove steering wheel. | AR46.10-P-0100LW | |
| 5 | Unclip cover (2) from steering column tube module (1). | Fig 1 | |
| 6 | Pull steering column tube module (1) off steering column tube. | Otherwise the clock spring contact will be destroyed. |
|
| 7 | Remove locking clip (6) from electrical connector (5). | ||
| 8 | Detach guide (4) together with electrical connector (5) from steering column tube module (1) and remove steering column tube module (1). | ||
| 9 | Install in the reverse order. |