Remove/Install Steering Wheel - AR46.10-P-0100LW

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 205

Model 213

Model 238

Model 253, 293

MODIFICATION NOTES

29.03.2018	General note on safety-relevant component parts added.
20.06.2018	Information on handling bolt revised.	Operation step 3

Fig 1: Steering Wheel Components Location - Model 213 (Shown On Model 205)

Courtesy of MERCEDES-BENZ USA

Shown on model 205

	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Turn steering wheel (1) to center position.	The front wheels must be in the straight-ahead position.
2	Remove airbag unit from steering wheel (1).		AR91.60-P-0660LW
3	Counterhold steering wheel (1) and remove bolt (2).	Installaton: Reuse screw (2) and mark with a non-water-soluble pen (color dot).
		Screw/bolt, steering wheel to steering shaft If the bolt (2) already bears a marking (color dot) ↓ replace the bolt (2).	*BA46.10-P-1001-02J
4	Release and disconnect electrical connection (3).
5	Remove steering wheel (1).	Model 205.### 1# Model 213.### 1# Model 238.### 1# Model 253.### 1#, 293.### 1# Installation: Align recesses of the splines (arrows A) in steering wheel (1) with the markings (a) on the steering shaft. Model 205.### 2# Model 213.### 2# Model 238.### 2# Model 253.### 2#, 293.### 2# Installation: Align recesses of the splines (arrows A) in steering wheel (1) with the markings (b) on the steering shaft.
6	Install in the reverse order.

STEERING WHEEL

Number	Designation		Model 205	Model 213
BA46.10-P-1001-02J	Screw/bolt, steering wheel to steering shaft	Nm	80	80

STEERING WHEEL

Number	Designation		Model 238	Model 253
BA46.10-P-1001-02J	Screw/bolt, steering wheel to steering shaft	Nm	80	80

STEERING WHEEL

Number	Designation		Model 293
BA46.10-P-1001-02J	Screw/bolt, steering wheel to steering shaft	Nm	80