Remove/Install Stabilizer Bar At Front Axle - AR32.35-P-2200LW

Model 205, 213 

except code M005 (4MATIC) 

Fig 1: Stabilizer Bar At Front Axle Components Location - Model 205, 213 Except Code M005

Courtesy of MERCEDES-BENZ USA

	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove/install
1	Remove front axle.	Model 205 except code M005 (4MATIC)	AR33.10-P-0100LW
		Model 213 (except 213.088/089/288/289) except code M005 (4MATIC)	AR33.10-P-0100LWE
2	Remove stabilizer bar link rods (2) from stabilizer bar (1).		AR32.35-P-3328LW
3	Remove bolts (3), remove mounting bracket (4) then remove stabilizer bar (1) to one side.	Bolt, torsion bar to longitudinal member	*BA32.20-P-1001-02R
4	Install in the reverse order
5	Perform chassis alignment.		AR40.20-P-0200LW

FRONT AXLE TORSION BAR

Number	Designation		Model 205 except code M005 (4MATIC)	Model 213 except code M005 (4MATIC)
BA32.20-P-1001-02R	Bolt, torsion bar to longitudinal member	Nm	70	70