Removing, Installing ADS Control Unit - AR32.32-P-0500LWE
Model 213.0/2
with code 459 (Steel suspension with adjustable damping)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on sensor system for trunk lid opening/closing | Model 213.0/2 with code 459 (Steel suspension with adjustable damping) with code P17 (KEYLESS-GO package) | AH80.61-P-0001-01A | |
| Remove/install | |||
| 1 | Perform commissioning of adaptive damping system control unit (N51/5) | When replacing the adaptive damping system control unit (N51/5). | |
| AD00.00-P-2000-04B | |||
| 2.1 | Remove side paneling in left side of luggage compartment | Model 213.0 with code 459 (Steel suspension with adjustable damping) | AR68.30-P-4800LWE |
| 2.2 | Remove left side load compartment lining | Model 213.2 with code 459 (Steel suspension with adjustable damping) | AR68.30-P-1185LWE |
| 3 | Remove sound system control unit | Model 213.0/2 with code 459 (Steel suspension with adjustable damping) with code 810 (Sound system) Model 213.0/2 with code 459 (Steel suspension with adjustable damping) with code 811 (Advanced sound system) |
AR82.62-P-7724LWE |
| 4 | Separate electrical connections (1) | ||
| 5 | Unclip adaptive damping system control unit (N51/5) | ||
| 6 | Install in the reverse order |