Remove/Install Air Suspension Control Unit - AR32.22-P-6000LWE
Model 213 with code 489 (AIRMATIC Dual Control/semi-active air suspension)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on HANDS-FREE ACCESS | Model 213 with code 489 (AIRMATIC Dual Control/semi-active air suspension) with code P17 (KEYLESS-GO package) | AH80.61-P-0001-01A | |
| Remove/install | |||
| 1 | Perform initial startup of AIR BODY CONTROL unit (N51/3) | When replacing AIR BODY CONTROL unit (N51/3). | |
| AD00.00-P-2000-04B | |||
| 2.1 | Remove side paneling in left side of luggage compartment | Model 213.0/1 with code 489 (AIRMATIC Dual Control/semi-active air suspension) | AR68.30-P-4800LWE |
| 2.2 | Remove left side load compartment lining | Model 213.2 with code 489 (AIRMATIC Dual Control/semi-active air suspension) | AR68.30-P-1185LWE |
| 2.3 | Remove sound system control unit | Model 213 with code 489 (AIRMATIC Dual Control/semi-active air suspension) with code 810 (Premium sound system) Model 213 with code 489 (AIRMATIC Dual Control/semi-active air suspension) with code 811 (High-End sound system) |
AR82.62-P-7724LWE |
| 3 | Separate electrical connections (1) | ||
| 4 | Unclip AIR BODY CONTROL unit (N51/3) | ||
| 5 | Unscrew nuts (2) | ||
| 6 | Remove bracket with AIR BODY CONTROL Plus control unit (N51/8) | ||
| 7 | Disconnect electrical connection (3) | ||
| 8 | Unclip AIR BODY CONTROL Plus control unit (N51/8) | ||
| 9 | Install in the reverse order |