Remove/Install Inner Trim On Seat Frame - AR91.10-P-1202MFA

Model 118, 177, 247 

except code 555 (AMMG-Performance Seat) 

Model 243 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove screws (3, 5).		AR91.10-P-1000MFA
		Do not clamp off ground line of on-board electrical system battery (G1). No electrical connectors must be disconnected.
2	Switch off ignition and store transmitter key outside of transmitter range (min. 2 m).
3	Position front seat so that the inner trim (1) is accessible.	Aid of helper required. Make sure that no components are damaged when positioning.
4	Remove bolt (2).
5	Carefully route inner trim (1) out of holder (6).	: Make sure that the retaining lug (7) is correctly seated in the holder (6).
6	Route inner trim (1) out of holder (8) and remove.	: Make sure that the retaining lug (4) is correctly seated in the holder (8).
7	Install in the reverse order.