Subsequently Connect And Install Digital Tachograph (DTCO), 2ND Generation - SM54.61-D-0005-02TS
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A |
| Notes on carrying out repair work in the vehicle interior | AH68.00-N-0001-01S |
Model 907 with code JD2 (Tachograph digital le with RPM + aux-recorder)
Model 907 with code JV6 (Tachograph pre-installation kit)
Shown on model 907 with code FF8 (1-DIN slot at front under roof lining)
- Route electric lines (2) and antenna line (3) outward as shown.
This makes it easier to connect the electric lines (2) and antenna line (3).
- Connect electric lines (2) and antenna line (3) to 2nd generation digital tachograph (DTCO) (1).
- Install 2nd generation DTCO (1) into device installation frame (4).
Ensure that no electric lines or component parts are damaged when inserting 2nd generation DTCO (1).
Otherwise, this can lead to 2nd generation DTCO (1) malfunctions, among other things.