Remove/Install 115V/230V Socket - AR54.10-P-1002LFA
Model 222
With Code 224 (Individual rear seats)
With Code U67 (230 V socket in rear passenger compartment)
Model 222
With Code 224 (Individual rear seats)
With Code U80 (115 V socket)
| Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | AS00.00-Z-0035-01A | |
| Remove/install | |||
| 1 | Detach ground line from battery | AR54.10-P-0003LF | |
| 2 | Open armrest cover (32) on center console of the rear compartment (25) | ||
| 3 | Set folding table in center console of the rear compartment (25) upright | MODEL 222 with CODE 449 (Rear folding table) | |
| 4 | Release bracket (33) with extraction hook (34) and fold forward far enough (arrow) until the interior lamp (35) is accessible | Fig 1 | |
| 5 | Detach interior lamp (35) from optical fiber | ||
| 6 | Unclip socket (36) forward out of the bracket (33), rotate through 90° and route with connected lines out through the bracket (33) | ||
| 7 | Unclip socket (37) forward out of the bracket (33), rotate through 90° and route with connected lines out through the bracket (33) | ||
| 8 | Unclip socket (X58/42, X48/44) forwards out of bracket (33) | ||
| 9 | Detach electrical connection (38) from socket (X58/42, X48/44) and remove socket (X58/42, X48/44) | ||
| 10 | Install in the reverse order |