Remove/Install Door Interior Actuating Mechanism On Rear Side Door - AR72.12-P-2310LF
Model 222
Shown on left door lining (1)
| Remove/install | |||
| 1 | Remove door lining (1). | AR72.12-P-1010LF | |
| 2.1 | Drill plastic spot welds (3) and remove inside door opener (2). | If the inside door opener (2) is attached using plastic spot welds (3). | AR72.00-P-0001-01LW |
Fasten inside door opener (2) with the screws and washers from the repair kit. |
|||
| 2.2 | Remove screws and take off the inside door opener (2). | If the inside door opener (2) is attached using screws. | |
| 3 | Install in the reverse order |