Installing Transport Foil - Ar97.20-P-4000GQ

MODEL 166 

	Attach foil
	Notes on transportation sheeting		AH97.20-P-9409-03A
1	Remove old foils	Heat zones up only to the extent that they can still be touched; otherwise, the paint could be damaged. Removal can be facilitated by heating.
2	Clean vehicle	Dry wet vehicles with chamois.
3	Check surface of vehicle	Visible edges of adhesive tape can remain (when performing reapplication). These edges are removed when the paint is prepared Minor swelling during reapplication is insignificant. The new foil can be applied to this painted surface.
4	Install new transportation foil	Do not mask off plastic parts and rubber profiles with foil (danger of glue residues). The new transportation foil is applied by hand.