Remove/install windshield washer system pump - AR82.35-P-6002NKC
MODEL 117 as of model year 2016
| Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | AS82.35-Z-0001-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Detach left front fender liner and lift far enough until washer fluid reservoir (4) is accessible | AR88.10-P-1300NKB | |
| 2 | Use suitable means to protect electrical connections (1) against leaking washer fluid | ||
| 3 | Release and detach washer fluid hoses (2) by turning and collect leaking washer fluid | ||
| 4 | Release and disconnect electrical connectors (1) | ||
| 5 | Release and remove windshield washer system pump (3) from the washer fluid reservoir (4) | Figure | |
| 6 | Visually inspect seal on pump for windshield washer system (3) | If the seal is damaged or porous. ↓ Replace seal. |
|
| 7 | Install in the reverse order | ||
| 8 | Fill with washer fluid | ||
| AP82.35-P-8210AK | |||
| Check | |||
| 9 | Check windshield washer system for proper operation | ||
| AP82.30-P-8252AK |