Remove/install fender liner in front fender - AR88.10-P-1300NKB

MODEL 117, 156, 176, 242, 246 

Shown on MODEL 246 

Fig 1: Front Fender Liner Remove/Install Components - Shown On Model 246 (1 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 2: Front Fender Liner Remove/Install Components - Shown On Model 246 (2 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 3: Front Fender Liner Remove/Install Components - Shown On Model 246 (3 Of 3)

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle with vehicle lift		AR00.60-P-1000AK
2	Remove expansion clips (2)
3	Remove screws/bolts (3)
4	Unscrew nuts (4)
5	Pull outer edge of fender liner (1) toward inside out of fender edge and remove fender liner (1) downward
6	Install in the reverse order