Remove/install loudspeaker amplifier control unit - AR82.62-P-7720NKC
MODEL 117 with CODE 810 (Sound system)
Shown on model 117.9
Shown on MODEL 117.3
| Notes on avoiding damage to optical fibers during repair work | AH82.60-P-0001-05AK | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Connect diagnostic system and perform initial startup of sound system amplifier control unit (N40/3) | When replacing sound system amplifier control unit (N40/3). | |
| AD00.00-P-2000-04A | |||
| 2 | Switch off ignition and remove transmitter key | ||
| 3.1 | Remove right paneling in trunk | Model 117.3 | |
| AR68.30-P-4800NKC | |||
| 3.2 | Remove left and right paneling (4) and move cover (3) towards rear until electrical connectors (2) are accessible | Model 117.9 | |
| AR68.30-P-1180NKC | |||
| 4 | Unclip control unit (5) cover | Model 117.9 | |
| 5 | Separate electrical connectors (2) | ||
| 6 | Unscrew nuts (1) and remove sound system amplifier control unit (N40/3) | ||
| 7 | Install in the reverse order | ||
| 8 | Perform function test |