Remove/install glove compartment - AR68.10-P-1400NKA

MODEL 117, 156, 176 

Shown on MODEL 176 

Fig 1: Glove Compartment Remove/Install Components - Shown On Model 176 (1 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 2: Glove Compartment Remove/Install Components - Shown On Model 176 (2 Of 3)

Courtesy of MERCEDES-BENZ USA

Fig 3: Glove Compartment Remove/Install Components - Shown On Model 176 (3 Of 3)

Courtesy of MERCEDES-BENZ USA

Shown on MODEL 117 with code 294 (Kneebag) and with code 494 (USA version) 

Fig 4: Glove Compartment Remove/Install Components - Shown On Model 117 With Code 294 And Code 494

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical components to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such components.	AS91.00-Z-0008-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Unclip paneling (2) and remove
2	Remove paneling on passenger side footwell	MODEL 156	AR68.10-P-1520NKX
		MODEL 117, 176	AR68.30-P-4010NKB
3	Disconnect battery ground line	MODEL 117, 156 with CODE 294 (Kneebag) with CODE 460 (Canada version) MODEL 117, 156 with CODE 294 (Kneebag) with CODE 494 (US version)
			AR54.10-P-0003NKB
4	Remove bolts (3)	MODEL 117 Only one bolt (3) is located on the left.
5	Open glove compartment (1)
6	Remove screws (5)
7	Unscrew bolt (4) and lay glove box (1) down in footwell
8	Disconnect electrical connectors on passenger knee airbag squib (R12/24) and ground line connector (12) from passenger knee airbag (11)	MODEL 117, 156 with CODE 294 (Kneebag) with CODE 460 (Canada version) MODEL 117, 156 with CODE 294 (Kneebag) with CODE 494 (US version)
9	Disconnect electrical connector (6)
10	Disconnect electrical connectors from bracket for navigation module	With CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box)
11	Remove glove box (1) from vehicle
12	Remove passenger knee airbag (11)	MODEL 117, 156 with CODE 294 (Kneebag) with CODE 460 (Canada version) MODEL 117, 156 with CODE 294 (Kneebag) with CODE 494 (US version) When replacing glove compartment (1).
			AR91.60-P-0100NKC
13	Disconnect electrical connector (10) and remove glove compartment lamp (E13/1)	When replacing glove compartment (1).
14	Disconnect electrical connector (7), remove pin (8) and unlock glove compartment lamp (9) by turning and remove	When replacing glove compartment (1).
15	Remove bracket for navigation module	With CODE 508 (Navigation box preinstallation) or with CODE 509 (Navigation box) When replacing glove compartment (1).
16	Install in the reverse order