Remove/install side paneling in rear - AR68.30-P-4780NKC

MODEL 117.3 

Fig 1: Rear Side Paneling Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical components to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such components.	AS91.00-Z-0008-01A
	Notes on performing repair, body work and welding on vehicles with airbags and RTE units		AH91.00-P-0002-01M
	Remove/install
1	Remove left or right backrest		AR91.12-P-1720NKB
2	Detach right and left side paneling in trunk		AR68.30-P-4800NKC
3	Remove trim from C-pillar		AR68.30-P-4490NKC
4	Remove left and right rear door sill		AR68.30-P-4100NKB
5	Detach edge guard (3) in area of paneling (1)
6	Remove expansion rivet (4)	The expansion clip (4) is located behind the paneling in the trunk on the right and left.
7	Remove covers and unscrew bolts (2) below	With CODE 293 (Sidebag in rear)
8	Detach paneling (1) from bottom upward in increments and remove
9	Install in the reverse order