Remove/Install Cover For Backrest Padding At Front Seat - AR91.10-P-8656LWX

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 205, 213, 253

with code 555 (AMG-Performance Seat)

Fig 1: Cover For Backrest Padding At Front Seat Components Location - Model 253 With Code 555

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove seat backrest padding (2) with cover (1).		AR91.10-P-0003LWX
2	Remove AMG badge.
3	Pull cover (1) over seat backrest padding (2).
4	Loosen staple wires (3) at attachment points (4).		AR91.10-P-8656-03LW
		Padding clip pliers	Fig 3
		Dismantling tool	Fig 2
5	Remove cover (1) from seat backrest padding (2).
	Install
6	Position cover (1) centrally on seat backrest padding (2) and align seams of cover (1) in notches of seat backrest padding (2).
7	Fasten staple wires (3) at attachment points (4).		AR91.10-P-8656-03LW
		Padding clip pliers	Fig 3
		Dismantling tool	Fig 2
8	Pull cover (1) over seat backrest padding (2).
9	Fasten AMG badge.
10	Install seat backrest padding (2) with cover (1).		AR91.10-P-0003LWX

Fig 2: Identifying Dismantling Tool (205 589 03 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Padding Clip Pliers (454 589 03 37 00)

Courtesy of MERCEDES-BENZ USA