Unfasten/Fasten Cover For Seat Backrest On Front Seat - AR91.10-P-8656-03LW

MODEL 205, 238, 253 

MODEL 206 

MODEL 213, 257, 290 

MODEL 223 

Fig 1: Identifying Dismantling Tool (205 589 03 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Padding Clip Pliers (454 589 03 37 00)

Courtesy of MERCEDES-BENZ USA

Fastening type A 

Courtesy of MERCEDES-BENZ USA

Fastening type B 

Courtesy of MERCEDES-BENZ USA

Fastening type C 

Courtesy of MERCEDES-BENZ USA

Fastening type D 

Courtesy of MERCEDES-BENZ USA

Release 

1. Unhook staple wire (1) at retaining clip (2) with dismantling tool.

   For covers with fastening type A

2. Loosen velcro fastener (3) from velcro fastener (4).

   For covers with fastening type B

3. Unhook hook (5) on staple wire (6).

   For covers with fastening type C

4. Remove wire ring (7) on staple wire (8).

   For covers with fastening type D

   Carefully remove residue from wire rings (7).

   Otherwise damage may occur.

   Mount 

5. Hook in staple wire (1) at retaining clip (2) with dismantling tool.

   For covers with fastening type A

6. Fasten velcro fastener (3) on velcro fastener (4).

   For covers with fastening type B

7. Hook in hook (5) on staple wire (6).

   For covers with fastening type C

8. Fasten staple wire (8) with wire ring (7) on eyelet of seat backrest padding.

   For covers with fastening type D

   Insert open wire ring (7) (arrow A), as shown, into padding clip pliers and close completely by pressing together (arrow B).