Flywheel, Driven Plate, Vibration Damper, Starter Ring Gear - BA03.30-P-1000-01S
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 260, 270, 274
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 133 | Engine 260 | ||
|---|---|---|---|---|---|
| BA03.30-P-1001-01S | Central bolt, belt pulley/vibration damper to crankshaft | Stage 1 | Nm | 200 | 200 |
| Stage 2 | ∠° | 90 | 180 | ||
| BA03.30-P-1003-01S | Bolt, two-mass flywheel/drive plate to crankshaft | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 90 | 90 | ||
FLYWHEEL, DRIVE PLATE, VIBRATION DAMPER, STARTER RING GEAR
| Number | Designation | Engine 270 | Engine 274 | ||
|---|---|---|---|---|---|
| BA03.30-P-1001-01S | Central bolt, belt pulley/vibration damper to crankshaft | Stage 1 | Nm | 200 | 200 |
| Stage 2 | ∠° | 180 | 180 | ||
| BA03.30-P-1003-01S | Bolt, two-mass flywheel/drive plate to crankshaft | Stage 1 | Nm | 45 | 45 |
| Stage 2 | ∠° | 90 | 90 | ||