Test Specifications For Crankshaft - BE03.20-P-1000-02K
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 270, 274
MODIFICATION NOTES
| 11.6.15 | Value changed: Crankshaft journal width at fitted bearing | Engine 270.910 | |
| 11.6.15 | Value changed: Crankshaft journal width at fitted bearing | Engine 270.920 | |
| 11.6.15 | Value changed: Crankshaft journal width at fitted bearing | Engine 274 |
CHECK VALUES FOR CRANKSHAFT
| Number | Designation | Engine 133 | Engine 270.910 | |||
|---|---|---|---|---|---|---|
| BE03.20-P-1001-02K | Sliding bearing pins (GZ) diameter | Nominal Ø | mm | 54, 940...54, 965 | 54, 940...54, 965 | |
| Repair stage 1 blue (BU) | GZ1 - GZ5 | mm | 54, 960...54, 965 | 54, 960...54, 965 | ||
| Repair stage 2 yellow (YE) | GZ1 - GZ5 | mm | 54, 955...54, 960 | 54, 955...54, 960 | ||
| Repair stage 3 red (RD) | GZ1 - GZ5 | mm | 54, 950...54, 955 | 54, 950...54, 955 | ||
| Repair stage 4 white (WH) | GZ1 - GZ5 | mm | 54, 945...54, 950 | 54, 945...54, 950 | ||
| Repair stage 5 violet (VT) | GZ1 - GZ5 | mm | 54, 940...54, 945 | 54, 940...54, 945 | ||
| BE03.20-P-1002-02K | Crankshaft journal width at fitted bearing | Marking N colorless (0) | mm | 24, 550...24, 590 | 24, 550...24, 590 | |
| Marking N1 red (1) | mm | 24, 650...24, 690 | - |
CHECK VALUES FOR CRANKSHAFT
| Number | Designation | Engine 270.920 | Engine 274 | |||
|---|---|---|---|---|---|---|
| BE03.20-P-1001-02K | Sliding bearing pins (GZ) diameter | Nominal Ø | mm | 54, 940...54, 965 | 54, 940...54, 965 | |
| Repair stage 1 blue (BU) | GZ1 - GZ5 | mm | 54, 960...54, 965 | 54, 960...54, 965 | ||
| Repair stage 2 yellow (YE) | GZ1 - GZ5 | mm | 54, 955...54, 960 | 54, 955...54, 960 | ||
| Repair stage 3 red (RD) | GZ1 - GZ5 | mm | 54, 950...54, 955 | 54, 950...54, 955 | ||
| Repair stage 4 white (WH) | GZ1 - GZ5 | mm | 54, 945...54, 950 | 54, 945...54, 950 | ||
| Repair stage 5 violet (VT) | GZ1 - GZ5 | mm | 54, 940...54, 945 | 54, 940...54, 945 | ||
| BE03.20-P-1002-02K | Crankshaft journal width at fitted bearing | Marking N colorless (0) | mm | 24, 550...24, 590 | 24, 550...24, 590 | |
| Marking N1 red (1) | mm | 24, 650...24, 690 | - |