General Notes: Passenger Cars: Crank Assembly - AH03.00-Z-9999AZ
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
MODEL all
| Assignment of pistons to cylinder bore | AH03.10-B-0001-02A | ||
| Assignment of pistons to cylinder bore | ENGINE 266.920/940/960/980 | AH03.10-P-0001-02AK | |
| Assignment of pistons to cylinder bore | ENGINE 639.939 in MODEL 454.0 | AH03.10-P-0001-02FG | |
| Notes on assessing wear on connecting rod bearings and connecting rod journals | Engine all (4xWD, CAR, smart) Engine all (Light transporter) | AH03.10-P-0001-03MM | |
| Notes on the assessment of pistons and piston rings | ENGINE 111, 112, 113, 133, 137, 139, 152, 155, 156, 157, 159, 166, 176, 177, 178, 200, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 281, 282, 285... | AH03.10-P-0001-04MM | |
| Notes on the assessment of pistons and piston rings | ENGINE 607, 608, 611, 612, 613, 622, 626, 628, 629, 639, 640, 642, 646, 647, 648, 651, 654, 656, 668, 699... | AH03.10-P-0001-04MN | |
| Installation notes for crankshaft radial shaft seals | ENGINE 120 | AH03.20-P-0001-01AO | |
| General information on assigning balancing shaft to engine | Engine 112 | AH03.20-P-1000-01AV | |
| Information on assessing wear of main bearings and main bearing journals | Engine all (4xWD, CAR, smart) Engine all (Light transporter) | AH03.20-P-1000-02MM | |
| Bearing diagram for crankshaft | ENGINE 639.939 in MODEL 454.0 | AH03.20-P-4351-01FG | |
| Bearing diagram for crankshaft | ENGINE 111, 166, 611, 612, 647, 668... | AH03.20-P-4351-01GF | |
| Bearing diagram for crankshaft | Engine 601, 602 (except 602.98), 603 Engine 601.943, 602.980/982/983/984/985 | AH03.20-P-4351-01KOB | |
| Bearing diagram for crankshaft | Engine 266.920/940/960/980 Engine 271.951 in model 906 Engine 271 Engine 640 | AH03.20-P-4351-01TK | |
| Interference fit of crankshaft bearing cap | AH03.20-B-4351-02A | ||
| Interference fit of crankshaft bearing cap | ENGINE 132, 133, 134, 135, 152, 157, 260, 264, 270, 274, 276, 278, 607, 608, 639... | AH03.20-P-4351-02MM | |
| Interference fit of crankshaft bearing cap | ENGINE 111, 166, 266, 271, 272, 273, 601, 602, 604, 605, 606, 611, 612, 613, 640, 647, 668... | AH03.20-P-4351-02VA |