000 588 10 19 00 Adapter Standard Kit - WS26.00-P-0230B

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Transmission all (4xWD, CAR, Heavy transporter, Light transporter)

Use in FG 26/27/28/41/Set B

Purpose:

Standard adapter set for adapting the inclinometer articulation angle.

Test equipment category CAT_A.

NOTE: In combination with W 000 588 04 19 00 Inclinometer articulation angle.

	000 588 10 19 01 Sensor attachment adapter		WS26.00-P-0230-01B
	000 588 10 19 02 Transmission adaptation adapter		WS26.00-P-0230-02B
	000 588 10 19 03 Transmission adaptation adapter		WS26.00-P-0230-03B
	000 588 10 19 04 Transmission adaptation adapter		WS26.00-P-0230-04B
	000 588 10 19 05 Rear axle transmission adaptation adapter		WS26.00-P-0230-05B

Reference information:

This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier is shown below.

Courtesy of MERCEDES-BENZ USA

Manufacturer

ROMESS Rogg Apparate + electronic GmbH & Co. KG

Dickenhardtstrasse 67

78054 VS- Schwenningen

Germany

http://www.romess.de

Standard adapter set
Article no.: 09935-25

Consisting of:

Type/model: Sensor attachment for adaptation
Article no.: 09935-20
Type/model: Transmission adaptation 0 10 mm
Article no.: 09935-21
Type/model: Transmission adaptation 0 15 mm
Article no.: 09935-22
Type/model: Transmission adaptation 0 16 mm
Article no.: 09935-23
Type/model: Adaptation for universal rear axle differential
Article no.: 09935-24

NOTE: A large set of adapters (consisting of W 000 588 10 19 00 and W 000 588 11 19 00) can be ordered using article number: 20036-22 DC from the manufacturer.