000 588 10 19 01 Sensor Attachment Adapter - WS26.00-P-0230-01B
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Transmission all (4xWD, CAR, Heavy transporter, Light transporter, TRUCK)
Use in FG 26/27/28/41/Set B
Purpose:
Sensor attachment adapter for adapting the inclinometer articulation angle.
Test equipment category CAT_A.
NOTE:
In combination with W 000 588 10 19 00 Adapter, standard set.
Reference information:
This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier is listed below.
Manufacturer
ROMESS Rogg Apparate + electronic GmbH & Co. KG
Dickenhardtstrasse 67
78054 VS- Schwenningen
Germany
http://www.romess.de
- Type/model: Sensor attachment for adaptation
Article no.: 09935-20