Remove/Install Emergency Call System Antenna - AR82.95-P-0017LWX
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 253.3
with code 360 (HERMES UMTS)
Model 253.3
with code 362 (HERMES communications module LTE)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove center liftgate paneling | AR72.20-P-6618LWS | |
| 2 | Disconnect electrical connection (1) | ||
| 3 | Loosen screw/bolt (2) | ||
| 4 | Remove emergency call system antenna (A2/52) | ||
| 5 | Install in the reverse order |