Remove/Install Center Liftgate Trim - AR72.20-P-6618LWS
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205.2
Model 213.2
Model 253
Model 293
Shown on MODEL 205.2
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove bottom liftgate trim (2). | Model 205.2, 213.2, 253 | AR72.20-P-6617LWS |
| Model 293 | AR72.20-P-6617EQ | ||
| 2 | Unclip center liftgate trim (1), swivel in the direction of the rear window, and remove. | ||
| 3 | Install in the reverse order. |