Remove/Install Trunk Lid Latch - AR72.20-P-1022LW
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205.2
Model 213.2
Model 253
Model 293
Shown on model 205.2 with code 890 (EASY-PACK liftgate)
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Notes on HANDS-FREE ACCESS | AH80.61-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove center liftgate trim (2). | AR72.20-P-6618LWS | |
| 2 | Disconnect electrical connector (3). | ||
| 3 | Remove vibration damper. | Model 293 | AR72.20-P-1025EQ |
| 4 | Remove screws/bolts (4). | *BA72.20-P-1004-02N | |
| 5 | Move trunk lid/liftgate latch (A85/5) out of liftgate (1). | ||
| 6 | Remove cable (5) from the trunk lid/liftgate latch (A85/5). | Model 205.2, 213.2, 253, 293 with code 890 (Automatic rear-end door) |
|
| 7 | Install in the reverse order. |
LIFTGATE
| Number | Designation | Model 205.2 | Model 213.2 | |
|---|---|---|---|---|
| BA72.20-P-1004-02N | Screw/bolt, door lock to liftgate | Nm | 9 | 9 |
LIFTGATE
| Number | Designation | Model 253 | Model 293 | |
|---|---|---|---|---|
| BA72.20-P-1004-02N | Screw/bolt, door lock to liftgate | Nm | 9 | 9 |