Reset Service Indicator To Previous Service - AP00.20-P-0044A
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 118, 156, 166, 167, 172, 176, 177, 190, 197, 204, 205, 207, 212, 213, 218, 231, 238, 242, 243, 246, 247, 253, 257, 290, 292, 293, 461, 463
| Reset | |||
| 1 | Connect diagnostic unit. | ||
| Model 117, 156, 166, 172, 176, 197, 204, 207, 212, 218, 231, 242, 246, 292, 461 Model 463 up to model year 2019 |
AD00.00-P-2000-04A | ||
| Model 167 | AD00.00-P-2000-06ME | ||
| Model 118, 177, 243, 247 | AD00.00-P-2000-06MFA | ||
| Model 190, 205, 213, 253 Model 463 as of model year 2019 |
AD00.00-P-2000-04B | ||
| Model 238 | AD00.00-P-2000-06LWO | ||
| Model 257, 290, 293 | AD00.00-P-2000-06FR | ||
| 2 | Reset service indicator to previous service. | Select menu item "Control units view" → Select menu item "IC - Instrument cluster (A1)"→ Select tab "Actuations" → Under "Selection", select menu item "Reset general maintenance" → Perform work procedure "Reset general maintenance" → From "IC - Instrument cluster (A1)", change back to "Control units view". |
|
| 3 | Disconnect diagnostic unit. | ||
| Model 117, 156, 166, 172, 176, 197, 204, 207, 212, 218, 231, 242, 246, 292, 461 Model 463 up to model year 2019 |
AD00.00-P-2000-04A | ||
| Model 167 | AD00.00-P-2000-06ME | ||
| Model 118, 177, 243, 247 | AD00.00-P-2000-06MFA | ||
| Model 190, 205, 213, 253 Model 463 as of model year 2019 |
AD00.00-P-2000-04B | ||
| Model 238 | AD00.00-P-2000-06LWO | ||
| Model 257, 290, 293 | AD00.00-P-2000-06FR |