Remove/Install Power Take-Off - AR27.45-P-0010MFC
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 724.0 in model 118, 177, 247 with engine 260
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Transmission 724.1 in model 118, 177, 247 with engine 260
with code M005 (Vehicles with 4MATIC/all-wheel drive)
Transmission 724.1 in model 118, 177, 247 with engine 282
with code M005 (Vehicles with 4MATIC/all-wheel drive)
| Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles. |
AS00.40-Z-0001-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Notice | Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A | |
| Notice | Notes on avoiding damage through contamination and foreign objects | AH00.00-P-5000-01A | |
| Notes on automatic transmission | AH27.19-P-0001-01NKB | ||
| Remove/install | |||
| 1 | Remove battery carrier. | AR54.10-P-0028MFA | |
| 2 | Remove propeller shaft. | AR41.10-P-0050MFA | |
| 3 | Remove the catalytic converter. | Transmission 724.1 in model 118, 177, 247 with engine 282.8 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR49.20-P-0100MFA |
| Engine 260 in model 118, 177, 247 with transmission 724.0 with code M005 (Vehicles with 4MATIC/all-wheel drive) Engine 260 in model 118, 177, 247 with transmission 724.1 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR49.20-P-0100MFC | ||
| Engine 282.9 in model 118, 177, 247 with transmission 724.1 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR49.20-P-0100MFD | ||
| 4 | Detach power take-off from clutch housing. | AR27.45-P-0010-01MFC | |
| Assembly cleaner | *BR00.45-Z-1028-04A | ||
Transmission 724.1 in model 118, 177, 247 with engine 282 with code M005 (Vehicles with 4MATIC/all-wheel drive) Screw/bolt, power take-off to coupling housing |
*BA27.19-P-1007-01E | ||
Transmission 724.1 in model 118, 177, 247 with engine 282 with code M005 (Vehicles with 4MATIC/all-wheel drive) Bolt, transmission housing to power take-off |
*BA27.19-P-1006-01E | ||
Screw/bolt, power take-off to coupling housing |
*BA27.10-P-1018-04F | ||
| 5 | Install in the reverse order. | ||
| Check | |||
| 6 | Check and correct oil level of dual-clutch transmission. | Transmission 724.0 in model 118, 177, 247 with engine 260 with code M005 (Vehicles with 4MATIC/all-wheel drive) | AR27.00-P-0104MFC |
| Transmission 724.1 in model 118, 177, 247 with engine 260 with code M005 (Vehicles with 4MATIC/all-wheel drive) Transmission 724.1 in model 118, 177, 247 with engine 282 with code M005 (Vehicles with 4MATIC/all-wheel drive) |
AR27.00-P-0104MFA |
AUTOMATIC TRANSMISSION COMPLETE
| Number | Designation | Transmission 724.0 | |||
|---|---|---|---|---|---|
| BA27.10-P-1018-04F | Screw/bolt, power takeoff to coupling housing | M8 | Stage 1 | Nm | 20 |
| Stage 2 | ∠° | 45 | |||
ELECTROHYDRAULIC CONTROLLER UNIT
| Number | Designation | Transmission 724.1 | ||
|---|---|---|---|---|
| BA27.19-P-1006-01E | Bolt, transmission housing to power take-off | M8 | Nm | 29 |
ELECTROHYDRAULIC CONTROLLER UNIT
| Number | Designation | Transmission 724.1 | ||
|---|---|---|---|---|
| BA27.19-P-1007-01E | Screw/bolt, power take-off to coupling housing | M8 | Nm | 29 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |