Bolt Tightening Procedure For Cylinder Head Cover - AR01.20-P-5014-03MFG
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 139 in model 118, 177, 247
| Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | AH00.00-P-0020-01A |
CRANKCASE VENTILATION SYSTEM, CYLINDER HEAD COVER, CAMSHAFT HOUSING
| Number | Designation | Engine 139 | ||
|---|---|---|---|---|
| BA01.20-P-1001-01R | Screw/bolt, cylinder head cover to cylinder head | Stage 1 | Nm | 10 |
| Stage 2 | ∠° | 90 | ||
- Tighten screws (1 to 28) in the numerical sequence
.