Bolt Plan For Timing Case Cover - AR01.40-P-8000-01MFG
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 139 in model 118, 177, 247
CRANKCASE, TIMING CASE COVER, END COVER
| Number | Designation | Engine 139 | |||
|---|---|---|---|---|---|
| BA01.40-P-1001-01K | Bolt, timing case cover to crankcase | M6 | Nm | - | |
| M8 | Stage 1 | Nm | 20 | ||
| Stage 2 | Nm | - | |||
| M10 | Nm | - | |||
Loosening procedure
- Remove screws (1 to 17) contrary to the tightening sequence.
Tightening pattern
- Tighten screws (16, 17) slightly by hand.
- Tighten screws (1 to 15) according to the tightening sequence
.
- Tighten screws (16, 17)