Remove/Install Bottom Parts Of Soundproofing - AR94.30-P-5300W
MODEL 172.4
diesel engine
| Picture item, etc. | Work instructions | ||
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Raise vehicle with vehicle lift | AR00.60-P-1000V | ||
| 1 | Middle bottom section of soundproofing | Vehicle without code (481) Underride guard Rechargeable drill/screwdriver |
|
| 2 | Underride guard plate | Vehicles with code (481) Underride guard Rechargeable drill/screwdriver |
|
| *BA61.40-P-1001-01D | |||
| 4 | Front bottom section of soundproofing | On vehicles with code (481) Underride guard; first remove underride guard plate (2). Unscrew bolts (5) and remove front bottom section of soundproofing (4). Rechargeable drill/screwdriver |
|
| Rear soundproofing bottom section | On vehicles with code (481) Underride guard; first remove underride guard plate (2). Unscrew bolts (7) and remove rear bottom section of soundproofing (6). Rechargeable drill/screwdriver |
UNDERBODY PROTECTION
| Number | Designation | Model 172 with code 481 | |
|---|---|---|---|
| BA61.40-P-1001-01D | Bolt, underbody protection plate | Nm | 17 |