Remove/install windshield washer system pump - AR82.35-P-6002RK

MODEL 231 

Fig 1: Windshield Washer System Pump Remove/Install Components

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove rear fender liner in right front fender		AR88.10-P-1300RK
2	Disconnect electrical connector (2)
3	Press together safety clamps (4, 5) and disconnect hoses (3, 6) from windshield washer system pump (M5/1)	Collect washer fluid which flows out.
4	Press windshield washer system pump (M5/1) out of bracket (7) of windshield washer system washer fluid reservoir (1) using assembly wedge	Collect washer fluid which flows out.
		Mounting wedge	Figure
5	Install in the reverse order
6	Fill windshield washer system washer fluid reservoir (1)
	Windshield washer system - inspect fluid level, adjust to correct level		AP82.35-P-8210EW
7	Check function of windshield washer system and headlamp cleaning system
	Windshield wipers, windshield washer system and headlamp cleaning system - function check		AP82.30-P-8252RK

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA