Remove/Install Poly-V-Belt Of Refrigeration Compressor Of Air Conditioning System - AR13.21-P-1203MNL
Engine 176 in Model 217, 222
Shown in Model 222 with code 487 (MAGIC BODY CONTROL)
Fig 1: Refrigerant Compressor Poly-V-Belt Components Location - Engine 176 In Model 222 (Shown Without Code 487)
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Remove | |||
| 1 | Remove front and center lower engine compartment paneling | AR61.30-P-1001LF | |
| 2 | Release tensioning device (2) clockwise and lock tensioning device (2) with a suitable drift | ||
| 3 | Remove poly-V-belt (3) | ||
| Check | |||
| 4 | Check belt pulley of A/C compressor for damage | If damage is present ↓ Replace A/C compressor. |
|
| AR83.55-P-5310MNL | |||
| 5 | Check belt pulley/vibration damper for damage | If damage is present ↓ Replace belt pulley/vibration damper. |
|
| AR03.30-P-1600MNL | |||
| 6.1 | Check top guide pulley for the poly-V-belt (3) of the refrigerant compressor for damage | Engine 176 in model 217, 222 except code 487 (MAGIC BODY CONTROL) If damaged ↓ Install new top guide pulley for the poly-V-belt (3) of the refrigerant compressor. |
|
| AR13.20-P-0003MNL | |||
| 6.2 | Check belt pulley of the hydraulic pump for damage | Engine 176 in model 217, 222 with code 487 (MAGIC BODY CONTROL) If damaged ↓ Install new belt pulley of the hydraulic pump. |
|
| Engine 176 in model 217, 222 as of model year 2018 with code 487 (Active Body Control (ABC)) |
AR32.50-P-0030LFM | ||
| 7 | Check bottom guide pulley for the poly-V-belt (3) of the refrigerant compressor for damage | If damaged ↓ Install new bottom guide pulley for the poly-V-belt (3) of the refrigerant compressor. |
|
| AR13.20-P-0004MNL | |||
| 8 | Check tensioning device (2) for the poly-V-belt (3) of the refrigerant compressor for damage | If damaged ↓ Install new tensioning device (2) for the poly-V-belt (3) of the refrigerant compressor. |
|
| AR13.20-P-0002MNL | |||
| Install | |||
| 9 | Fit the poly-V-belt (3) | AR13.22-P-3902-02MNL | |
Do not use belt wax or similar products. This leads to slipping of poly-V-belt (3). |
|||
| 10 | Pull out drift and tension the poly-V-belt (3) with tensioning device (2) | ||
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 11 | Perform an engine test run and check engine for proper function | ||
| 12 | Install front and center engine compartment paneling | AR61.30-P-1001LF |