Remove/Install Rear Camber Strut - AR35.20-P-0110MNE

Model 213.088/089/288/289 

Left rear camber strut shown 

Fig 1: Rear Camber Strut Components Location - Model 213.088/089/288/289 (Left Rear Camber Strut Shown)

Courtesy of MERCEDES-BENZ USA

	Notes on threaded connections fastened using a tightening angle-based tightening process		AH00.00-P-0020-01A
	Notes on handling, transport and storage of ceramic brake disks		AH42.10-P-9406-13A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
	Notes on repair work on suspension components		AH00.00-P-0100-01A
	Remove j
1	Remove rear axle. '		AR35.10-P-0010MNE
2	Detach camber strut (1) from wheel carrier (2)	The screwdriver bit is to be used when a bolt with a multi-socket tooth profile is fitted. Screwdriver bit	Fig 2
3	Detach camber strut (1) from rear axle carrier (3) and remove	The screwdriver bit is to be used when a bolt with a multi-socket tooth profile is fitted. Screwdriver bit	Fig 2
	Check
4	Check camber strut (1) for condition and damage	When reinstalling camber strut (1). If there are problems ↓ Replace camber strut (1).
5	Check elastomer bearing of camber strut (1) on wheel carrier (2) for condition and damage	If there are problems ↓ Replace elastomer bearing.	AR35.20-P-3404MNE
	Install
6	Mount camber strut (1) on rear axle carrier (3)	The screwdriver bit is to be used when a bolt with a multi-socket tooth profile is fitted. Bolt, camber strut to rear axle carrier	*BA35.20-P-1001-02L
		Screwdriver bit	Fig 2
7	Mount camber strut (1) on wheel carrier (2)	The screwdriver bit is to be used when a bolt with a multi-socket tooth profile is fitted. Bolt, camber strut to wheel carrier	*BA35.20-P-1002-02L
		Screwdriver bit	Fig 2
8	Install rear axle		AR35.10-P-0010MNE

Fig 2: Identifying Screwdriver Bit (119 589 00 10 00)

Courtesy of MERCEDES-BENZ USA