LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2018 >> E300 Base >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft - 213 Chassis >> Testing & Repair >> Replace Pilot Bushing - AR41.10-P-0250LW

Replace Pilot Bushing - AR41.10-P-0250LW

Model 205, 213, 238, 253 (except 253.992/993) 

G13746407Courtesy of MERCEDES-BENZ USA
CAUTION Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.		 AS00.00-Z-0017-01A
  Notes on self-locking nuts and bolts   AH00.00-N-0001-01A
  Notes on threaded connections fastened using a tightening angle-based tightening process   AH00.00-P-0020-01A
REMOVING Remove     
1 Remove propeller shaft (1). Model 253 (except 253.992/993) AR41.10-P-0050LWX 
Model 205, 213, 238 AR41.10-P-0050LW 
2 Check sealing lips on front and rear pilot bushing (10) for wear and damage. If problems exist,
↓
Replace corresponding pilot bushing (10).		  
3 Separate propeller shaft (1) at slide joint.   AR41.10-P-0050-05LW 
Long-life grease *BR00.45-Z-1001-06A 
4 Remove flex disk (12).   AR41.10-P-0040-01LW 
REFER TO SHOP-MADE TOOLS Drift for releasing the fitting sleeves in the flexible couplings   WF58.50-P-4110-01A
SPECIAL TOOL Counterholder Fig 1
5 Remove pilot bushing (10).   AR41.10-P-0250-02LW 
INSTALLING Install     
6 Pack cavity of front and rear pilot bushing (10) with grease.    
REFER TO CAPACITIES & SPECIFICATIONS Multipurpose grease (NLGI Class 2)   BB00.40-P-0267-00A
7 Press in pilot bushing (10).   AR41.10-P-0250-03LW 
Model 213 Press-in dimension "a" from face end of pilot bushing to joint flange *BE41.10-P-1001-04O 
Model 253 Press-in dimension "a" from face end of pilot bushing to joint flange *BE41.10-P-1001-04N 
Model 205 Press-in dimension "a" from face end of pilot bushing to joint flange *BE41.10-P-1001-04K 
Model 238 Press-in dimension "a" from face end of pilot bushing to joint flange *BE41.10-P-1001-04P 
8 Install flex disk (12).   AR41.10-P-0040-01LW 
TORQUE SPECIFICATION Model 213 Flexible coupling to transmission/rear axle differential or propeller shaft *BA41.10-P-1001-01M 
TORQUE SPECIFICATION Model 238 Flexible coupling to transmission/rear axle differential or propeller shaft *BA41.10-P-1001-01N 
TORQUE SPECIFICATION Model 205
Model 253 (except 253.992/993) Flex disk or joint flange at transmission/rear axle differential or propeller shaft		 *BA41.10-P-1001-01L 
SPECIAL TOOL Counterholder Fig 1
9 Connect propeller shaft (1) to slide joint.   AR41.10-P-0050-05LW 
Long-life grease *BR00.45-Z-1001-06A 
10 Install propeller shaft (1). Model 253 (except 253.992/993) AR41.10-P-0050LWX 
Model 205, 213, 238 AR41.10-P-0050LW 
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 205
BE41.10-P-1001-04K Press-in dimension "a" from face end of pilot bushing to joint flange Four-arm flange Hole circle Ø 120 Front propeller shaft mm 25, 3
Rear propeller shaft mm 28, 8
Three-arm flange Hole circle Ø 110 Front propeller shaft mm 24, 8
Rear propeller shaft mm 28, 3
Hole circle Ø 100 Front propeller shaft mm 23, 3
Rear propeller shaft mm 26, 8
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 253.303/305/309/903/905/909 1# except code 8U9, model 253.303/305/903/905
with code 8U9 except code 460/494/498/835, model 253.343/378, model 253.346/349 except code 494/835, model 253.943 except code 700, model 253.946/949 except code 494/700/835		 Model 253.177/178/180/18 1/184/354/364/377/9 42/964, model
253.303/305/903/90 5 2# except code 8U9, model 253.303/305/903/90 5 with code 460/494/498/835 + code 8U9 model 253.309/909 with code 8U9, model 253.346/349/946/94 9 with code 494/835, model 253.943/946/949 with code 700, model 253.954 except code 494/498
BE41.10-P-1001-04N Press-in dimension "a" from face end of pilot bushing to joint flange Rear propeller shaft mm 34, 80 24, 50
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 253.309/909 2# except code 8U9, model 253.325/925/948, model 253.954 with code 494/498
BE41.10-P-1001-04N Press-in dimension "a" from face end of pilot bushing to joint flange Rear propeller shaft mm 26, 00
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 213.004/013/064/148/183/204/213/264 Model 213.048 except code 700 (Technology Local Content China) Model 213.066/071/266/271 2# Model 213.005/040/042/043/045/049/076/077/078/086/087/205/217/242/243/245/277/278/279/287 Model 213.066/071/266/271 1#
BE41.10-P-1001-04O Press-in dimension "a" from face end of pilot bushing to joint flange Front propeller shaft mm 24, 80 23, 30
Rear propeller shaft mm 28, 30 26, 80
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 213.020/022/033/050/122/131/220/222/233 Model 213.048 with code 700 (Technology Local Content China)
BE41.10-P-1001-04O Press-in dimension "a" from face end of pilot bushing to joint flange Front propeller shaft mm 25, 30 23, 30
Rear propeller shaft mm 28, 80 28, 30
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 213.140/142/143/163/176/177/178/186 Model 213.088/089/288/289
BE41.10-P-1001-04O Press-in dimension "a" from face end of pilot bushing to joint flange Front propeller shaft mm 23, 30 28, 80
Rear propeller shaft mm 23, 30 28, 80
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 213.104 Model 213.023/080/083/085/180/223/227/280/283
BE41.10-P-1001-04O Press-in dimension "a" from face end of pilot bushing to joint flange Front propeller shaft mm 24, 80 24, 80
Rear propeller shaft mm 24, 80 36, 30
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 238.314/323/348/385/423/485 Model 238.315
BE41.10-P-1001-04P Press-in dimension "a" from face end of pilot bushing to joint flange Front propeller shaft mm 24, 80 23, 30
Rear propeller shaft mm 36, 30 34, 80
CHECK VALUES FOR PILOT BUSHING ON PROPELLER SHAFT

Number Designation Model 238.343/378/487 Model 238.320/420
BE41.10-P-1001-04P Press-in dimension "a" from face end of pilot bushing to joint flange Front propeller shaft mm 23, 30 25, 30
Rear propeller shaft mm 26, 80 28, 80
PROPELLER SHAFT

Number Designation Model 205 Model 253
BA41.10-P-1001-01L Flex disk or joint flange at Self-locking nut transmission/rear axle differential or propeller shaft     Nm 68 -
Direct threaded connection Stage 1 Nm 60 60
Stage 2 ∠° 90 90
PROPELLER SHAFT

Number Designation Model 213
BA41.10-P-1001-01M Flexible coupling to transmission/rear axle differential or propeller shaft Direct threaded connection Stage 1 Nm 60
Stage 2 ∠° 90
PROPELLER SHAFT

Number Designation Model 238
BA41.10-P-1001-01N Flexible coupling to transmission/rear axle differential or propeller shaft Direct threaded connection Stage 1 Nm 60
Stage 2 ∠° 90
Fig 1: Identifying Counterholder (176 589 00 40 00)
G10132845Courtesy of MERCEDES-BENZ USA
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1001-06A Long-life grease A 000 989 63 51 11
scientia non olet · About LEMON Manuals