Check Condition Of Elements For Shock Absorption And Springing - AP32.25-P-3255C
Model 190
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | AS00.00-Z-0009-01A | |
| Preparatory activity | |||
| 1 | Lift vehicle on vehicle lift | ||
| AR00.60-P-1000RG | |||
| Check | |||
| 2 | Check shock absorber (1) for external leaks | AP32.00-P-3255-01A | |
| If there are problems: ↓ Rectify problem subject to separate repair order. |
|||
| 3 | Check shock absorber (1) for external damage, deformation and corrosion | AP32.00-P-3255-01A | |
| If there are problems: ↓ Rectify problem subject to separate repair order. |
|||
| 4 | Check condition and seating of springs (2) | Springs (2) may not be broken and must be seated correctly. Damage can occur otherwise. |
|
| If there are problems: ↓ |
|||
| Rectify problem subject to separate repair order. | |||
| 5 | Check condition of elastomer bearings (3) | If there are problems: ↓ Rectify problem subject to separate repair order. |
|
| 6 | Check protective boot (4) in visible area for correct seating, damage and deformation | If there are problems: ↓ Rectify problem subject to separate repair order. |
|
| 7 | Check suspension strut mount (5) in visible area for correct seating, damage and deformation | If there are problems: | |
| Rectify problem subject to separate repair order. | |||
| Finishing activity | |||
| 8 | Lower vehicle with lifting platform |