Lift/Jack Up Vehicle - AR00.60-P-1000RG

Model 190 

Shown on right side of vehicle 

Courtesy of MERCEDES-BENZ USA

	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
Notice	Information on influencing load ratios when removing major assemblies		AH00.60-P-0001-01A
	Lift/lower vehicle
1	Align vehicle between the vehicle lift columns and position the four vehicle lift support plates at the vehicle lift support points (1).
	000 588 00 80 00 Vehicle lift	Use drive-on aids if necessary.	WS00.00-P-0040B
2	Adapt the vehicle lift support plates of the vehicle lift swivel arms to match the height of the vehicle.
	000 588 00 80 00 Vehicle lift	Turn the vehicle lift support plates until they make contact with the vehicle lift support points (1).	WS00.00-P-0040B
3	Secure vehicle against tilting and toppling.	Only when removing major assemblies (e.g., engine, front axle carrier, axles).	AR00.60-P-0100RG
4	Lift vehicle with vehicle lift.
	000 588 00 80 00 Vehicle lift	Do not lift the vehicle with a pit jack or floor jack. Otherwise, the body may be damaged.	WS00.00-P-0040B
5	Lower vehicle in reverse order.