Vehicle Holding, Basic Function - GF42.47-P-1008A

Model All (4xWD, CAR) 

Overview 

This document contains information on:

• General 
• Functions 
  • Standstill check 
  • Hill Start Assist 
  • HOLD function 

General 

Depending on the situation, various subsystems intervene in order to secure the vehicle after stopping. They make a contribution to driver comfort and vehicle safety.

Functions 

Standstill check 

The standstill control (SSC) causes the vehicle to assume a safe standstill state. For this purpose, the SSC monitors the braking driver assistance systems until the vehicle has reached a safe standstill.

Hill Start Assist 

The Hill Start Assist holds the vehicle stationary for a short time when driving off on inclines without the driver having to operate the brake.

HOLD function 

The HOLD function holds the vehicle stationary without the driver having to operate the brake. The function assists the driver during waiting times in traffic.

	Additional basic functions
	Standstill control, basic function		GF42.47-P-1009A
	Hill Start Assist, basic function		GF42.47-P-1010A
	HOLD function, basic function		GF42.47-P-1011A