Apply Glue For Panoramic Roof Frame - AR77.21-P-0800-03RG
Model 190.3 with code 416 (Panoramic sunroof)
- Cut triangular opening of application nozzle so that adhesive can be applied with a height of approx. 13 mm and a width of approx. 8 mm.
- Guide application nozzle along bonding surface (area D) on body flange, squeezing out adhesive evenly.
Immediately remove contamination caused by the adhesive. Completely remove excess adhesive from cartridges immediately after applying adhesive and dispose of it as per local regulations.