Remove/Install Rear Wall Paneling - AR68.30-P-4750RG

Model 190.3 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove strut tower brace		AR64.20-P-0010RG
2	Remove side panelings in left and right rear		AR68.30-P-4780RG
3	Remove door sill moldings		AR68.30-P-4100RG
4	Remove left and right expansion rivets (2)
5	Unscrew screws/bolts (3) and remove covers (4)
6	Unclip cover (5) from center console with assembly wedge (6)	The area around the cover (5) must be covered with a suitable cloth. To prevent damage to adjacent trims. Mounting wedge	Fig 1
7	Remove expansion rivets (7) behind driver' seat and front passenger seat
8	Remove rear wall paneling (1)
9	Install in the reverse order

Fig 1: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA