Remove/Install Center Paneling In Trunk - AR68.30-P-4810RG

Model 190.3 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove side paneling in right or left trunk		AR68.30-P-4800RG
2	Unclip expansion rivet (2)	Clip remover	Fig 1
3	Lift center paneling in trunk (1) and remove from vehicle in direction of travel	Ensure that center paneling is seated correctly in trunk (1) in guide rail of trunk partition.
4	Install in the reverse order

Fig 1: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA