Remove/Install Fender Liner In Rear Fender - AR88.10-P-1400RG
Model 190
except code M032 (Black Series version)
Shown on right side of vehicle
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Remove/install | |||
| 1 | Remove rear left or right wheel and tire assembly | AR40.10-P-1100RQ | |
| 2 | Unscrew bolt (2) | ||
| 3 | Remove expansion rivets (3, 5) | Fig 1 | |
| 4 | Unscrew nuts (4) | ||
| 5 | Detach and remove fender liner (1) on left or right from fender, longitudinal member panel and rear bumper | ||
| 6 | Install in the reverse order |