LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> GT AMG >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Wheels, Chassis Alignment -- 190 Chassis >> Testing & Repair >> Remove/Install Wheels - AR40.10-P-1100RQ

Remove/Install Wheels - AR40.10-P-1100RQ

Model 190, 197 

G10133202Courtesy of MERCEDES-BENZ USA
G16677834Courtesy of MERCEDES-BENZ USA
DANGER Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
WARNING Risk of poisoning  caused by swallowing the TIREFIT emulsion. Risk of injury  caused by skin contact and eye contact with the TIREFIT emulsion. Risk of fire  caused by ignition of the TIREFIT emulsion Do not swallow or come into contact with the TIREFIT tire sealant, which is an emulsion of rubber and terpene phenolic resin. No open flames or open light sources. AS40.10-Z-0001-01A 
  TIREFIT tire sealant   AH40.10-P-0001-01A 
REMOVING Remove     
1 Lift vehicle with vehicle lift.   AR00.60-P-1006A
2 Unscrew wheel bolts and remove wheel and tire assemblies. NOTES
Remove complete wheel only with wheel lift.
Otherwise the brake disks and wheel and tire assemblies may be damaged!
 
INSPECT Check     
3 Check tires for damage and condition.    
Topical note  Information on tires/rims   AH40.10-P-9411-01A 
REFER TO MAINTENANCE     AP40.10-P-4051EW 
4 Clean and check components of wheel threaded connections, and protect against corrosion.   AR40.10-P-1100-02A 
    NOTES
Before mounting a wheel-and-tire assembly all the operation steps listed in the linked description must be conducted carefully.
Otherwise the wheel-and-tire assembly may work its way loose from the vehicle and cause damage to people, property or the environment.
 
    IMPORTANT Use a suitable assembly cleaner.  
    Paste, hot lubrication 1 kg, DBL 6879.20 *BR00.45-Z-1005-06A 
INSTALLING Install     
5 Position wheel and tire assemblies. NOTES
Mount complete wheel only with wheel lift.
The brake disks and complete wheels can otherwise be damaged.
 
    NOTES
The wheel-and-tire assemblies on the front and rear axle have different dimensions. The wheel-and-tire assemblies may therefore not be exchanged per axle. Note running direction of wheel-and-tire assemblies.
Otherwise the handling characteristics may be impaired and damage to the body and complete wheels may occur.
 
6 Tighten wheel bolts. IMPORTANT Observe the tightening sequence (1 to 5) and tightening torque.  
    TORQUE SPECIFICATION Wheel bolt *BA40.10-P-1001-01C 
7 Lower vehicle.   AR00.60-P-1006A
8 Correct tire pressure of all complete wheels. IMPORTANT See tire pressure values in the vehicle's fuel filler flap.  
9 Check expiry date of TIREFIT tire sealant.    
10 Activate tire pressure monitoring system (RDK). Only for wheel rotation, tire replacement or change in tire pressure  
    Model 197
Activate tire pressure monitor (RDK)
AR54.30-P-1000-02RQ
    Model 190 AR54.30-P-1001-01LC
WHEELS

Number Designation Model 190 Model 197
BA40.10-P-1001-01C Wheel bolt Size 17 Nm - 130
Size 19 Nm 180 180
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1005-06A Paste, hot lubrication 1 kg, DBL 6879.20 A 000 989 76 51