Checking Accident Vehicles And Vehicles Possibly Damaged In An Accident - AR40.30-P-0400GZ

Model 164, 166, 292 

	Check
1	Drive the vehicle onto the measuring station and secure using the parking brake	The measuring system must be approved by Mercedes-Benz.
2	Perform preparations for distance and comparative measurements	Model 164	AR40.30-P-0401GZ
		Model 166, 292	AR40.30-P-0401GQ
3	Carry out distance and comparison measurements on front and rear axles	These measurements determine whether i is necessary to replace chassis components or repair the body on the straightening bench. Use either the reference value (difference between left and right) or the distance for assessment. If there is any visible damage (e.g. crack formation, deformation) on the front axle or rear axle carrier, the damaged parts must be replaced.	AR40.30-P-0402GZ
4	Repair vehicle	Where damage has been detected.
5	Perform Wheel alignment check	If the vehicle has been repaired. Model 164	AR40.20-P-0200GZ
		Model 166, 292	AR40.20-P-0200GQ