Preparations For Distance And Comparison Measurements - AR40.30-P-0401GQ

Model 166, 292 

Shown on model 166 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Risk of injury  from engine start by remote start function	Prior to starting work, open engine hood, do not reach into rotation range or hazard area of freely rotating parts, wear closed and snug-fitting work clothes	AS00.00-Z-0024-01A
	Remove
1	Align the vehicle horizontally in the longitudinal direction by loading with weights as appropriate.	The vehicle inclination must be measured over the door sills, e.g. using a spirit level.
2	Remove underfloor paneling		AR61.30-P-1001GQ
3	Remove left catalytic converter	Model 166 with engine 642, 651	AR49.10-P-7100GQB
		Model 166 with engine 276.8	AR49.10-P-5500GQC
		Model 166, 292 with engine 157, 278	AR49.10-P-5500MLJ
4	Remove the left and right bolt (63a) on the rear engine cross member (63)
5	Screw in the left and right threaded pin (07n) on the mounting (07)	Mount	Fig 5
6	Insert and adjust hanger (07)		AR40.30-P-0401-01GQ
		Mount	Fig 5
		Retaining tube	Fig 3
7	Insert telescopic measuring rod (06) with connecting parts at retaining bolt with tubular bubble level (024b)	The relevant measuring pin and relevant measuring tip (024) has to be inserted for the corresponding distance or reference dimension.
		Connecting pieces	Fig 6
		Telescopic measuring rod	Fig 1
		Telescopic measuring rod	Fig 2
		Measuring set	Fig 4
	Measure
8	Carry out distance and comparison measurements on front and rear axles		AR40.30-P-0402GZ
	Install
9	Detach cradle (07) and threaded bolts (07n)	Mount	Fig 5
10	Screw in the left and the right bolt (63a) for the rear engine cross member (63)	Bolt, rear engine crossmember to body	*BA22.10-P-1005-03G
11	Install left catalytic converter	Model 166 with engine 276.8	AR49.10-P-5500GQC
		Model 166 with engine 642, 651	AR49.10-P-7100GQB
		Model 166, 292 with engine 157, 278	AR49.10-P-5500MLJ
12	Install underbody paneling		AR61.30-P-1001GQ

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation		Model 166 with engine 157	Model 166 with engine 276, 642, 651
BA22.10-P-1005-03G	Bolt, rear engine crossmember to body	Nm	55	55

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation		Model 166 with engine 278	Model 292 with engine 157
BA22.10-P-1005-03G	Bolt, rear engine crossmember to body	Nm	55	55

ENGINE MOUNT, ENGINE SUPPORT (ENGINE SIDE)

Number	Designation		Model 292 with engine 276, 642	Model 292 with engine 278
BA22.10-P-1005-03G	Bolt, rear engine crossmember to body	Nm	55	55

Fig 1: Identifying Telescopic Measuring Rod (124 589 01 19 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Telescopic Measuring Rod (124 589 02 19 00)

Courtesy of MERCEDES-BENZ USA

Fig 3: Identifying Retaining Tube (164 589 04 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 4: Identifying Measuring Set (168 589 07 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 5: Identifying Mount (170 589 00 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 6: Identifying Connecting Pieces (124 589 08 63 00)

Courtesy of MERCEDES-BENZ USA