Remove/Install Center Air Nozzle - AR68.10-P-1150GQ

Model 166, 292 

Shown on model 166 up to model year 2016 

Courtesy of MERCEDES-BENZ USA

Shown on model 166 as of model year 2016 

Fig 1: Center Air Nozzle/Vent Components Location - Model 166 (Shown As Of Model Year 2016)

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove radio (A2) and COMAND controller unit (A40/3).		AR82.60-P-7502GQ
2	Remove radio display.	Model 166 as of model year 2016 Model 292
			AR82.60-P-7722GQC
3	Remove screws (3) from center air vent (1).
4.1	Unclip center air vent (1).	Model 166, 292 up to model year 2016 Position inner top extraction hooks (01) on the center air vent (1). Ensure that center air vent (1) is installed correctly in instrument panel.
		Extraction hook	Fig 2
4.2	Unclip center air vent (1).	Model 166, 292 as of model year 2016
		Position top center extraction hooks (01) on the center air vent (1) (arrow). Ensure that center air vent (1) is installed correctly in instrument panel.
		Extraction hook	Fig 2
5	Unclip electrical connector and release and disconnect.	Model 292
6	Remove center air vent (1).
7	Install in the reverse order

Fig 2: Identifying Extraction Hook (140 589 02 33 00)

Courtesy of MERCEDES-BENZ USA