LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2017 >> GLS450 >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Electrical System - Body - 166 Chassis 2 Of 8 >> Basic Knowledge >> Speaker Output Function >> (Speaker Output Function - GF82.62-P-4212GR)

(Speaker Output Function - GF82.62-P-4212GR)

MODEL 166 

up to model year 2016 

Function requirements, general 

General 

A distinction is made between the following procedures:

Speaker actuation in the emergency call system (with CODE 359 (TELEAID emergency call system) or CODE 348 (Emergency call/assist system)) is described in the following documents:

Speaker output in vehicles with CODE 811 (Advanced sound system) 

The audio signals are routed by the audio equipment via Media Oriented System Transport (MOST) to the sound system amplifier control unit (N40/3) where they are finally amplified and output over the following speakers via direct lines:

The sound system amplifier control unit forwards the audio signals for the speakers listed below to the bass speaker amplifier (N40/9).

The woofer amplifier actuates the following speakers via direct lines:

IMPORTANT The center instrument panel speaker is used for voice output in vehicles with CODE 348 (Emergency call/assist system) and active vehicle-related service and actuated via direct lines by the emergency call system control unit (N123/4).

IMPORTANT With the left and right front door speakers, mirror triangle, the woofer amplifier exclusively actuates the illumination.

During actuation of the speaker system, the volume is adapted to the noise level in the vehicle interior. To do so, the sound system amplifier control unit reads in the sound system microphone (B25/6).

Speaker output in vehicles with CODE 810 (Sound system) 

The audio signals are forwarded from the audio equipment via MOST to the sound system amplifier control unit, where they are amplified and output over the following speakers via direct lines:

IMPORTANT The center instrument panel speaker in vehicles with CODE 359 (TELEAID emergency call system) or CODE 348 (Emergency call/assist system) and active vehicle-related services is used for voice output and actuated by the emergency call system control unit via direct lines.

Speaker output in vehicles except CODE 811 (Advanced sound system) and CODE 810 (Sound system) 

The audio signals are output via the following speakers by the audio equipment using direct lines:

Speaker actuation in the event of voice output 

In the event of voice output during telephony or navigation (with CODE 512 (COMAND APS with DVD changer), with CODE 527 (COMAND APS with single DVD drive (with navigation)) or with CODE 509 (Navigation box)), only the front speakers are actuated.

In vehicles except CODE 810 (Sound system) and CODE 811 (Advanced sound system), these are the following speakers:

In vehicles with CODE 811 (Advanced sound system), the following speakers are actuated for voice output:

In vehicles with CODE 810 (Sound system), the following speakers are actuated for voice output:

  Electrical function schematic for speaker system   PE82.62-P-2300-97NAA
  Overview of system components, telematics   GF82.85-P-9999GR